CMC and HSRP?

Hi sandramunoz999,

I'm checking with the PG team.

"Hi sandramunoz999,

I'm checking with the PG team."

Hello Kong, many thanks for verifying this. I still got the CMC pointing to one of the physical interfaces (no longer the standby IP) and I found out we got another issue with intervlan routing. I hope to get this resolved then try both with the physical interface that is directly connected to the CMC, and with the standby IP... we are also using NAT for remote connections.

Hello Kong, many thanks for verifying this. I still got the CMC pointing to one of the physical interfaces (no longer the standby IP) and I found out we got another issue with intervlan routing. I hope to get this resolved then try both with the physical interface that is directly connected to the CMC, and with the standby IP... we are also using NAT for remote connections. ..

"Hi sandramunoz999,

I'm checking with the PG team."

Hello Kong, many thanks for verifying this. I still got the CMC pointing to one of the physical interfaces (no longer the standby IP) and I found out we got another issue with intervlan routing. I hope to get this resolved then try both with the physical interface that is directly connected to the CMC, and with the standby IP... we are also using NAT for remote connections.

Oops, sorry for the SPAM, I didnt see my reply added immediately and thought something was wrong on my end.

i have verified CMC works with the physical IP of the switches, I am yet to try the Standby IP.

Thanks sandramunoz999. I'm still waiting for responses from my contacts.

sandramunoz999,

Sorry I haven't heard back from anyone. Have you taken a look at this write-up?

http://www.ciscosystems.or.at/en/US/docs/switches/blades/3130/software/release/12.2_40_ex/configuration/guide/swhsrp.html

Hello KongY no worries! as it is while troubleshooting, a coworker configured the Standby IP, and it works as well. I will keep your link as I will be supporting the blades in the future. Thanks! I will be seeing you around...