Unsolved
This post is more than 5 years old
15 Posts
0
514
May 3rd, 2007 14:00
Celerra Manager 5.4 - System Status- Red X
System Status shows a Red X
Hardware status shows
Clariion CX500 Warning
Shelf 0/0 SP A Is Ready to Restore
This has happened in the past and EMC tech support had dialed in and fixed it.
I would like to know what causes it, and how I can fix it myself.
Thanks. Robin Cole -Colo DOT
Hardware status shows
Clariion CX500 Warning
Shelf 0/0 SP A Is Ready to Restore
This has happened in the past and EMC tech support had dialed in and fixed it.
I would like to know what causes it, and how I can fix it myself.
Thanks. Robin Cole -Colo DOT
No Events found!
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
May 3rd, 2007 14:00
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
May 3rd, 2007 19:00
nas_storage -info id=APM00051906566
where APM is the id for your Clariion. You will see this output, look for entry
if it's true that means that you have luns that have trespassed. Run this command to fail them back their default owners.
nas_storage -failback id=APM00051906566
at that point i would refresh you Celerra Manager GUI ..and it should look ok. You might have to manually "Accept" the alert to clear it.