Solved!
Go to Solutioncheckpoints celerra pause
Hi,
I have a problem, have ckpt :
nas_ckpt_schedule -list
Id Name State Next Run Description
2 sched_CajonDesastre Active Wed Dec 10 17:35:00 CET 2014
3 sched_CajonDesastre2 Paused Wed Dec 10 17:35:00 CET 2014
4 sched_CajonDesastre3 Paused Wed Dec 10 17:20:00 CET 2014
5 sched_CajonDesastre4 Paused Wed Dec 10 17:50:00 CET 2014
14 sched_CajonDesastre5 Paused Fri Dec 12 18:15:00 CET 2014
6 sched_COMUNICACIONES Paused Wed Dec 10 17:30:00 CET 2014
11 sched_FS_UNIDADES1 Active Wed Dec 10 17:50:00 CET 2014
7 sched_HOME Paused Wed Dec 10 17:30:00 CET 2014
13 sched_nasproyectos Active Mon Dec 15 18:30:00 CET 2014
9 sched_SGDT_CAMINOS Paused Wed Dec 10 17:45:00 CET 2014
10 sched_SISTEMAS Paused Wed Dec 10 17:40:00 CET 2014
as I can re-activate?
I activated the filesystem deduplication
and I get errors espacion of SavVol
any suggestions?
Thanks!
697
0
Posted December 10th, 2014 01:00
What about
$ nas_ckpt_schedule -resume { |id= }
697
0
Posted December 10th, 2014 02:00
Hi Peter!
$ nas_ckpt_schedule -resume id=14 (for example)
OK
I want to activate ckpt...
697
0
Posted December 10th, 2014 04:00
I am not sure if I understand you correct. You have "inactive" checkpoints and want to activate them?
Checkpoints will become "inactive" if there is not enough savvol space for saving the necessary data. At the moment a checkpoint will become "inactive" its data in the savvol is marked as deleted and the available savvol space is increased. at that moment, there is no way back, because this was triggered because "new" data could not saved into the savvol.
You can just delete or refresh "inactive" checkpoints, but there is no way to get the missing data back.697
0
Posted December 10th, 2014 04:00
Hi!
I have some ckpt "paused"
I think they have stopped manually and would want that were active
nas_ckpt_schedule -list
Id Name State Next Run Description
2 sched_CajonDesastre Active Wed Dec 10 17:35:00 CET 2014
3 sched_CajonDesastre2 Paused Wed Dec 10 17:35:00 CET 2014
4 sched_CajonDesastre3 Paused Wed Dec 10 17:20:00 CET 2014
697
0
Posted December 10th, 2014 06:00
Thanks!!
[nasadmin@VNX-Atocha ~]$ nas_ckpt_schedule -list
Id Name State Next Run Description
2 sched_CajonDesastre Active Wed Dec 10 17:35:00 CET 2014
3 sched_CajonDesastre2 Active Wed Dec 10 17:35:00 CET 2014
4 sched_CajonDesastre3 Active Wed Dec 10 17:20:00 CET 2014
5 sched_CajonDesastre4 Active Wed Dec 10 17:50:00 CET 2014
Peter_EMC
674 Posts
697
0
Posted December 10th, 2014 06:00
you do not have ckpt "paused", but the ckpt schedule paused.
can you do a
$ nas_ckpt_schedule -resume id=2
$ nas_ckpt_schedule -resume id=3
$ nas_ckpt_schedule -resume id=4