Unsolved
This post is more than 5 years old
29 Posts
0
9497
emcopy migration error
I am getting these following error s while using emcopy , can any please let me know what these error means
TH049 : 21:23:51 : ERROR (2) : \\cifs MCS Reports 2012\Acumen Reports\Recovery by Client -> SD not set, Failed after 1 retries.
TH011 : 21:18:22 : ERROR (5) : \\?\UNC\cifs\fs1\Root\Files\\DBOCHE~2.PRC -> Unable to create file
TH057 : 21:18:24 : ERROR (5) : \\?\UNC\cifs\fs1\Root\DBOCRE~3.PRC -> DELETION FAILED.
TH010 : 21:36:53 : ERROR (32) : \\10.200.6.150\D$\cifs\Root\users Group 2012 attendees 07132012.xlsx -> Unable to open, Failed after 1 retries.
TH019 : 21:44:25 : ERROR (64) : \\10.200.6.150\D$\cifs\Root\users\ Exit Interview_files\Smith Chaunte_files\* -> Unable to get content, Retrying in 1 seconds...
TH061 : 21:56:25 : ERROR (1392) : \\?\UNC\10.200.6.150\D$\cifs\Root\users\ Studies.US -> Unable to open, Retrying in 1 seconds...
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
August 6th, 2012 13:00
looks like you don't have access to either read or write to source/target
dkakljkml
29 Posts
0
August 6th, 2012 14:00
Most of the sahres are copied as well as the file underneath them , but some of the files are showing uo these errors.
I belive error 32 --- is respect to open files .
rest of them am not sure .
mark_rogov
14 Posts
0
August 6th, 2012 16:00
EmCopy Error codes
Reading EMCOPY Error codes can seem cryptic. In reality, emcopy will most of the time display normal Windows codes. Here is the reference on how to read them, and where to get information.
All Windows codes can be found here: System Error Codes
Sample Errors in the LOG:
TH005 : 11:14:05 : ERROR (32) : V:\Data5\w5385.pst -> Unable to open, Failed after 1 retries.
So, here, the ERROR is 32, which Windows defines as:
Code: ERROR_SHARING_VIOLATION 32 (0x20)
Description: The process cannot access the file because it is being used by another process.
TH064 : 10:21:22 : ERROR (2) :
vdm4\fs41$\6E1BB5DF-8122-AA86B2598977 -> SD not set, Failed after 1 retries.
With ERROR 2, the reading is the following:
Code: ERROR_FILE_NOT_FOUND 2 (0x2)
Description: The system cannot find the file specified.
Best regards,
--MR
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 7th, 2012 07:00
Mark,
Thanks for you reply , Do you know what the error 5 specifically means . the share folder has full access as everyone.
ahill1989
5 Posts
0
October 9th, 2014 16:00
We are having the same issue, where you ever able to resolve error 5
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
October 10th, 2014 06:00
Hey Ahill , In my case it was an access issue . If you still have issue, there is tool call beyond compare , its a licensed tool but , it is free for a month use. try this tool to copy the missing files . this tool does a side to side comparison and will show you the missing files on the target .
sonivivek
3 Posts
0
March 29th, 2015 22:00
Hello there,
You can get the error messages decoded from cmd prompt by typing "net helpmsg ".
I too have the same issue and have no clue with error code 32 & 64 even though I'm performing the activity from a LAN connected host with Domain Admin creds.
32: The process cannot access the file because it is being used by another process. (I checked and the location is not being used/accessed/mapped by anybody.)
64: The specified network name is no longer available. (Both the servers are always available).
Any help would be appreciated![](https://prod-care-community-cdn.sprinklr.com/community/687062f5-603c-4f5f-ab9d-31aa7cacb376/Reemcopymigrationerror-5d6f70b6-fc62-4bd2-a69b-c49567abb312-1691835606)
Best regards,
Vivek Soni
bergec
275 Posts
1
March 30th, 2015 04:00
Error 32 usually indicates that the file being copied is locked by a process on the source (for example a user has the .doc file opened by MS Word)
Error 64 usually when UNC path points to a file which no longer exists, it should not repeat during incremental copy
It can also occur if source is overloaded because EMCopy is running with a lot if threads or source is a stub (archived) and source cannot be found
Both errors should resolve during incremental copies. If not then they should be investigated further
Claude Berges
Sent from my mobile device
sonivivek
3 Posts
0
March 30th, 2015 04:00
Thanks Claude, I'm running an incremental and I see all warnings at the moment with "File will be recovered following posterior copy failure" instead of errors. Is this is normal ? Do you think another run after this completes will be required to completely copy the data ?
Best regards,
Vivek Soni