UNSOLVED
C
ChrisSeattle
2 Posts
0
339
June 10th, 2011 22:00
Need to re-address my Celerra
I have a Celerra NSX that is moving to a new subnet. I have to re-address all IP addresses. Are there tools in Celerra I can use to help with this change? Know of any documentation which explains how to do this? I was not the person who initially setup the system.
Chris
ChrisSeattle
2 Posts
144
0
Posted June 13th, 2011 13:00
All addresses are changing. I will look over these documents. Thanks.
umichklewis_ac7b91
300 Posts
144
0
Posted June 11th, 2011 06:00
Are the IP addresses for the Celerra changing as well as the control station(s) and Clariion SPs?
Search Powerlink for the document Celerra Network Server System Operations, for the appropriate version of DART you're using. You'll find instructions for changing the control station IP addresses and the Clariion SPs.
You'll also want to looking at Configuring and Managing Celerra Networking, which will explain how to manage IP addresses on the Celerra datamovers.
Let us know if this helps!
Karl