Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
JT
Jens-t6YFy
6 Posts
0
593
December 12th, 2007 02:00
Quota paths - not shown correctly
Hi!
Some quota paths are not correctly shown within the EMC Celerra Manager Webinterface (Basic Edition V 5.4) and via cli commands on the control station.
The quota path only show a ..
Example:
nas_quotas -list -fs id=190
+------------------------------------------------------------------------------+
| Quota trees for filesystem fs_xy mounted on /xy:
+------+-----------------------------------------------------------------------+
|TreeId| Quota tree path (Comment) |
+------+-----------------------------------------------------------------------+
| 2 | /.. () |
| 3 | /this_is_a_correct_path () |
+------+-----------------------------------------------------------------------+
The quota with tree id 2 works fine, but the path name is not listed correctly. Is there a way to correct this?
Thanks a lot.
Jens
Message was edited by:
Jens
Some quota paths are not correctly shown within the EMC Celerra Manager Webinterface (Basic Edition V 5.4) and via cli commands on the control station.
The quota path only show a ..
Example:
nas_quotas -list -fs id=190
+------------------------------------------------------------------------------+
| Quota trees for filesystem fs_xy mounted on /xy:
+------+-----------------------------------------------------------------------+
|TreeId| Quota tree path (Comment) |
+------+-----------------------------------------------------------------------+
| 2 | /.. () |
| 3 | /this_is_a_correct_path () |
+------+-----------------------------------------------------------------------+
The quota with tree id 2 works fine, but the path name is not listed correctly. Is there a way to correct this?
Thanks a lot.
Jens
Message was edited by:
Jens
Rainer_EMC
6 Operator
•
8645 Posts
240
0
Posted December 12th, 2007 07:00
anything unusual in these path names that dont work ?
does running the nas_quotas as root and not nasadmin make a difference ?
If not - please open a service request and ask support to check for emc159270Jens-t6YFy
6 Posts
240
0
Posted December 13th, 2007 05:00
I've tried both, specify the fs name has the same effect. The path name is only 8 chars long and has no special characters or whitespaces.
Thanks for your answers.Rainer_EMC
6 Operator
•
8645 Posts
240
0
Posted December 17th, 2007 08:00
if you can - pleasse let us know what the solution was after you opened that service request
dynamox
11 Legend
•
20419 Posts
•
87439 Points
240
0
Posted December 12th, 2007 06:00
nas_quotas -list -tree -fs myfsname