This post is more than 5 years old
71 Posts
0
477
May 21st, 2008 10:00
Hardware failures (Problem with Upgrade CentraStar)
Hello all!
I have a problem with CentraStar upgrade! "Hardware failures check (4.0-68) ERROR
There are hardware failures in the cluster: Failure
reported on node c001n08: rootswitch0, rootswitch1.
Failure Info: Resolve these issues before attempting an
upgrade. "All nodes and rootswitches working normally. What could be the problem?
I have a problem with CentraStar upgrade! "Hardware failures check (4.0-68) ERROR
There are hardware failures in the cluster: Failure
reported on node c001n08: rootswitch0, rootswitch1.
Failure Info: Resolve these issues before attempting an
upgrade. "All nodes and rootswitches working normally. What could be the problem?
No Events found!
StevenRuo
19 Posts
0
July 24th, 2008 07:00
Upgrades should be done by EMC customer engineers. I'm not sure if you are an EMC employee or not, but regardless, I can answer your question. A failure message for both root switches on one node generally indicates a problem with the motherboard on that node. This is an issue that should be given to Centera Technical Support to analyze and resolve.
Regards,
Steven Ruo