UNSOLVED
M
mark_preston1
2 Posts
0
791
August 26th, 2008 08:00
replication has just stopped.
Hello
We have two Centera's replicating from one to the other but since Friday the replication has stopped. My knowledge of Centera is limited unfortunately so go easy on me
.
I can find no errors, replication is still enabled and no changes have been applied to either of the centera's and there does not appear to be any network issues. The details from show repl detail are:
Replication Enabled : 11 August 2006
Replication Paused: no
Replication Address: the IP addres of the other Centera
Replicate Delete: no
Replicate incoming replicated Objects : no
Replicated Pools : all pools
Profile Name:
Number of C-Clips Writes to be replicated: 0
Number of Blob Wirtes to be replicated: 0
Number of MB to be replicated: 0
Number of Parked Entries: 0
Replication Speed: 0 Clip/s
Ingests: 0
Replication ETA: N/A
Repication Lag < 1 hour
Even though this has over a weekend there are always clips being replicated. Can anyone suggest a good place to start?
We have two Centera's replicating from one to the other but since Friday the replication has stopped. My knowledge of Centera is limited unfortunately so go easy on me
I can find no errors, replication is still enabled and no changes have been applied to either of the centera's and there does not appear to be any network issues. The details from show repl detail are:
Replication Enabled : 11 August 2006
Replication Paused: no
Replication Address: the IP addres of the other Centera
Replicate Delete: no
Replicate incoming replicated Objects : no
Replicated Pools : all pools
Profile Name:
Number of C-Clips Writes to be replicated: 0
Number of Blob Wirtes to be replicated: 0
Number of MB to be replicated: 0
Number of Parked Entries: 0
Replication Speed: 0 Clip/s
Ingests: 0
Replication ETA: N/A
Repication Lag < 1 hour
Even though this has over a weekend there are always clips being replicated. Can anyone suggest a good place to start?
384
1
Posted August 26th, 2008 08:00
Hi prestonmark12,
If you feel that items are not being queued for replication for some reason, please open a support case with EMC and they can perform a quick write tests and make sure replication is functioning.
Regards,
Ross384
0
Posted August 28th, 2008 05:00
We opened a support case. I should have put in my thread that there was a queue of about 250000 clips building up and that this was how we found out that the was no replication happening. As it turns out, the problem was at the server end where the transfer was happening and not the Centera.
Thanks for your input though, much appreciated.
EMCDennis
124 Posts
384
1
Posted August 26th, 2008 08:00
Replication Paused: no
And has nothing to replicate as shown by:
Number of C-Clips Writes to be replicated: 0
Number of Blob Wirtes to be replicated: 0
Number of MB to be replicated: 0
Number of Parked Entries: 0
Everything has replicated so it's sitting idle