SDK on windows

Question

Any idea
1.how , where\ link guide to install the SDK on a windows server 2003 .
2. how to verify if its already installed and if so how to check the version ?

never use this before and i have to apply the emc88942 but i should confim the sdk installation first

holgerjakob_c0722c · Accepted Answer

Hi homLocate FPLibrary.dll, right-click on the file and check the version in its properties.That will tell you which version of the SDK you are using.Holger

EMCDennis · Answer

emc88942 pertains to setting up SDK logging. The SDK is built into the application you are using to communicate with the Centera. You do not need to install this. Where it lives is up to the application vendor but generally it is compliled into the application and is not a separate 'tool'.

To setup SDK logging requires that you define environment variables and then restart the application. Once restarted, logging will be taking place. SDK logs can become quite large very quickly so only leave this enable long enough to reproduce the problem that you are enabling SDK logging to trace. Remove the environment variables and restart the application to remove SDK logging - Do this per emc88942 and do this on the node where the application is running. Your application vendor should be able to assist with this if you have problems or further questions.

EMCDennis · Answer

Sorry - wrong primus - try emc101608

EMCDennis · Answer

Try emc88942

Joe_Ab · Answer

am using DiskXtender , and i have to check either its an SDK 2.1 or 3.1 or later any idea ?

Joe_Ab · Answer

thanks diness and holger

Centera

SDK on windows

Was this post helpful?