While configuring SNMP trap in centera we facing issue
Hi All,
We have a centera box g4 & g4L4 model, I have configured the snmp from centera. Please find the SNMP output below
Config# show snmp
SNMP enabled: Enabled
Management Station: 10.2.202.221:162
Community name: public
Heartbeat trap interval: 1 minute
we are configuring the SNMP trap to the monitoring tools NAGIOSXI, we have gave the MIB to the tools team from this path C:\Program Files\EMC\Centera\4_2\GlobalServices\lib but we getting the error as OID is not matching, please find the below error;
root@mmkndnagxi mibs]# addmib Centera.mib
No log handling enabled - turning on stderr logging
add_mibdir: strings scanned in from /usr/share/snmp/mibs/.index are too large. count = 30
Cannot find module (SNMPv2-SMI): At line 11 in ./Centera.mib
Did not find 'enterprises' in module #-1 (./Centera.mib)
Unlinked OID in CENTERA-MIB: emc ::= { enterprises 1139 }
Undefined identifier: enterprises near line 26 of ./Centera.mib
Cannot adopt OID in CENTERA-MIB: genericNotify ::= { notificationData 1 }
Cannot adopt OID in CENTERA-MIB: emc ::= { enterprises 1139 }
Cannot adopt OID in CENTERA-MIB: centera ::= { emc 5 }
Cannot adopt OID in CENTERA-MIB: trapAlarmNotification ::= { notificationTrap 2 }
Cannot adopt OID in CENTERA-MIB: trapNotification ::= { notificationTrap 1 }
Cannot adopt OID in CENTERA-MIB: notificationData ::= { centera 2 }
Cannot adopt OID in CENTERA-MIB: notificationTrap ::= { centera 0 }
Cannot adopt OID in CENTERA-MIB: notifySeverity ::= { genericNotify 4 }
Cannot adopt OID in CENTERA-MIB: notifyDescription ::= { genericNotify 3 }
Cannot adopt OID in CENTERA-MIB: notifyServer ::= { genericNotify 2 }
Cannot adopt OID in CENTERA-MIB: notifyTimestamp ::= { genericNotify 1 }
Currentley I'm unable to locate any document related to configuring SNMP with NAGIOSXI.Could you please give me the output of the command "show snmp" from Centera Viewer.
Thanks for the response.I'm unable to locate any document or material realting to error.I would suggest that it would be better if you could open a Service Request for the same with the Centera Support team and they should be able to look into the issue in detail.
Satish_Kutty
216 Posts
1182
0
Posted November 29th, 2011 06:00
Hi,
Currentley I'm unable to locate any document related to configuring SNMP with NAGIOSXI.Could you please give me the output of the command "show snmp" from Centera Viewer.
Regards
Satish.N.Kutty