Unsolved
This post is more than 5 years old
17 Posts
0
513
January 15th, 2008 01:00
AX100SC Write cache still disabled!
Hi all,
first let me admit I am not the most clued up guy in terms of EMC hardware, but have had an AX100 SC install dumped in my lap! All seemed to go according to plan, except that I cannot get the write cache to enable. I have replaced the cache card, rebooted the unit, and ensured that I have green check boxes against the list of components. Nothing seems to be wrong other than I have one unregistered connection that isn't required (haven't registered it to remove it!). What am I missing? The box was brand new, connected via a switch, virtual disk presented to the server running 2003 Server. HELP!!!
first let me admit I am not the most clued up guy in terms of EMC hardware, but have had an AX100 SC install dumped in my lap! All seemed to go according to plan, except that I cannot get the write cache to enable. I have replaced the cache card, rebooted the unit, and ensured that I have green check boxes against the list of components. Nothing seems to be wrong other than I have one unregistered connection that isn't required (haven't registered it to remove it!). What am I missing? The box was brand new, connected via a switch, virtual disk presented to the server running 2003 Server. HELP!!!
No Events found!
ecorona1
65 Posts
0
February 28th, 2008 14:00
what unregistered connection are you talking about?
garcd7
26 Posts
0
August 8th, 2008 12:00