This post is more than 5 years old
116 Posts
0
1701
February 22nd, 2012 06:00
Clariion CX340F - maximum DAE's/disks
Hi
I'm looking for a document that specifies the maximum number of DAE's and/or disks possible in a CX340f. Been looking around powerlink/EMC.com but unable to locate so far.
Any help appreciated.
Thanks in advance!



dynamox
9 Legend
•
20.4K Posts
0
February 22nd, 2012 07:00
240 drives max, 15 drives per dae
Sent from my Verizon Wireless 4GLTE Phone
dynamox
9 Legend
•
20.4K Posts
0
February 22nd, 2012 06:00
CX3 Model 40 Systems – Hardware and Operational Overview
nicbone
116 Posts
0
February 22nd, 2012 06:00
Thanks for the responses. Had already had a browse around there and also checked the doc you reference but cant see anything for hard limits on disks and DAE's.
I'm sure i saw it a long time ago on the spec sheet. Maybe i am missing something or looking too hard.
I need to capacity plan for an imminent requirement and need to make sure i'm not going to exceed the array!
dynamox
9 Legend
•
20.4K Posts
0
February 22nd, 2012 06:00
should be in one of these documents
Home > Support > Technical Documentation and Advisories > Hardware/Platforms Documentation > CLARiiON CX3 UltraScale Series Systems > CLARiiON CX3-40 > General Reference
nicbone
116 Posts
0
February 22nd, 2012 07:00
Thanks - where did you get that figure from? Apologies if it was the doc you referenced.
dynamox
9 Legend
•
20.4K Posts
0
February 22nd, 2012 09:00
no problem, bottom of page 3
SKT2
2 Intern
•
1.3K Posts
0
June 7th, 2012 18:00
another short cut, model number * 60; mean cx3-10 can have 60, cx3-20 can have 120 and cx3-40 can have 240 drives. And devide by 15 to get the number of DAE
nicbone
116 Posts
0
June 8th, 2012 03:00
Thanks for the information - thats useful to know.