DAE4P is not supported with CX300. For disk compatibility (if you have any free slots to insert them) you may check the Part Number and verify the same in the Disk and FLARE OE matrices shared by Dynamox.
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
dynamox
9 Legend
•
20.4K Posts
1
July 15th, 2013 18:00
take a look at this document
https://support.emc.com/docu42949_All-VNX-CLARiiON-Celerra-Storage-System-Disk-and-FLARE-OE-Matrices.pdf?language=en_US
Vipin VK
2 Intern
•
812 Posts
0
July 15th, 2013 22:00
DAE4P is not supported with CX300. For disk compatibility (if you have any free slots to insert them) you may check the Part Number and verify the same in the Disk and FLARE OE matrices shared by Dynamox.
Array Model Type / DAE Type
CX200/400/600
CX300/500/700
CX3-10/3-20/
3-40/3-80
CX4-120/4-240/
4-480/4-960
DAE3P (DAE4P)
NO
NO
YES
YES
nfnhf65
6 Posts
0
December 2nd, 2014 03:00
How can i know if my KTN-STL4 use DAE2P or DAE3P ?
Roger_Wu
4 Operator
•
4K Posts
0
December 2nd, 2014 17:00
I found the picture on ebay, CX-4PDAE is DAE4P,
kelleg
4 Operator
•
4.5K Posts
0
December 9th, 2014 14:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen