CX4 + MV/s + SRM5.0 -- is it supported?

Would also like to know this.  The latest VMware doc suggests it isn't currently supported:

http://www.vmware.com/pdf/srm_storage_partners.pdf

Would like to know if it's a matter of time before a MV/S & MV/A SRA is available for SRM 5 or if this will not be released.

Thanks

I heard from EMC internals that the SRA is currently in the certification process and may be GA next week.

That would be great.

We are in a similar situation.

2 CLARiiON CX-120 in sync with a/sync MirrorView.

We are trying VMware SRM 5.0, but we are missing the enabler for the new SRA for MirrorView.

On page 3 of EMC document 300-102-684 (EMC VNX SRA for vCenter Site Recovery Manager 5 version 5.0) they clearly state that you need 2 components to have the CLARiiON and SRM 5 working together:

- VNX SRA

- EMC MirrorView Enabler for VNX SRA

The first one is available on powerlink under

Support > Software Downloads and Licensing > Downloads A-B > Adapters for Third-Party Applications

The second one (the enabler) is not available at the same location on powerlink.

It would be nice to know when EMC is going to publish it.

pfuhli,

I hope your sources are right and the missing piece is published soon.

I'll post an update as soon as I know more...

anyone hear anything?  I cant believe EMC has let this slip this long.

Other than Chad Sakac's blog saying it was imminent I've not heard anything further to this thread.  I asked our local TCs but no further insight.

We had to make the call to run with SRM v4 for the project I was looking at due to timescales.

sorry - no news on that from my sources too :-/

MV SRA has been certified with SRM 5.0.

Will take a few days to post it on the official websites.

We'll see when this will be ;-)

Looking today on powerlink under

"Support > Software Downloads and Licensing > Downloads A-B > Adapters for Third-Party Applications"

I found the "MirrorView Enabler for VNX" download.

After installing it on our two SRM 5.0 servers (protected site and recovery site) I was able to succesfully scan for SRAs within VMware Site Recovery Manager interface.

The next step (according to VMware documentation) is to add the Array Manager in VMware SRM.

We do have two CLARiiON CX4-120 with A/Sync MirrorView over iSCSI.

When we try to add the first array manager by populating the relevant info (IPs of the CLARiiON, username, password) we get the following error:

Unable to add array manager:

Internal error: std::exception 'class Vmacore::Xml::XMLParseException' "Invalid document structure".

The documentation for the MirrorView enabler on powerlink is still missing, so I do not really know if we are doing something wrong.

Here is how we installed and configured our SRM servers:

• The two sites are correctly paired and seen in vCenter Client
• Installed EMC Navisphere CLI on SRM servers on both sites (required by MirrorView Enabler)
  • Do not create security file (Is it correct?)
  • Low level for Certificate checking
• Installed EMC MirrorView Storage Replication Adapter (SRA) on SRM servers on both sites
  • Installed EMC VNX SRA (5.0.1) for VMware SRM
  • Installed EMC MirrorView Enabler (5.0.2) for VNX SRA
• Scan for SRAs works fine within VMware vSphere Client
• When trying to configure first the Array Manager we get the error mentioned above

Dear vJonas,

looking at the document http://www.vmware.com/pdf/srm_storage_partners.pdf I still see that EMC CLARiiON is supported only for SRM 4.x

I have not logged a support case at VMware for this.

I was waiting the offiical SRM 5 support for CLARiiON before opening a support request.

vJonas,

you are right about page 11.

The fact is that we have MirrorView running over iSCSI and not Fiber Channel.

So are we out of luck?

Any news about when the support for iSCSI will be added?

One more note: I have solution enabler 32 bit installed on default location.

I have a quick question about this setup. I have Mirror View running between two CX4s. I installed

Navisphere CLI , EMC VNX SRA (5.0.1) for VMware SRM, EMC MirrorView Enabler (5.0.2) for VNX SRA

When I try to add array I only see a VNX on the "SRA Type" pull down menue. I don`t see choice for MirrorView.

I tried All IPs {Primary SPA, Primary SPB, Seondary SPA, Secondary SPB} , I keep getting the folloiwng error..

SRA command 'discoverArrays' failed. Unable to locate enabler for input connection information.

Verify the Management IP/Hostname and credentials.

Any ideas what is going on wrong here..

Thanks

Dear Tru64GUY,

I think that seing the VNX SRA when you try to configure the array manager is fine. My understanding is that you should see the SRA Type in the combo box and not the Enabler. So seing VNX SRA should be OK.

Regarding your error, have you rescanned for SRAs within VMware SRM ?

In any case, note that if you have MirrorView running over iSCSI (like I do), the SRA has not been certified for use with iSCSI on the CLARiiONs. It has been certified only for FC.

Mine is fiber channel.