This post is more than 5 years old
17 Posts
1
886
Does anyone know how to clear a hot spare warning?
I have a hot spare warning that will not go away.
There are no available hot spares on the storage system. Creating hot spares is highly recommended.
this has a date that the san was initialize. i now have a hot spare, and the hot spare lun configured, but the warning will not go away.
There are no available hot spares on the storage system. Creating hot spares is highly recommended.
this has a date that the san was initialize. i now have a hot spare, and the hot spare lun configured, but the warning will not go away.
ovivier
142 Posts
1
November 21st, 2008 06:00
To restart management server go to :
http://IP/setup
(where IP is the IP address of your SP)
Log in with "admin"
Clic on "restart the management server"
You will be disconnected of the SP but it will still be online for servers.
ovivier
142 Posts
1
November 21st, 2008 07:00
- you have created a hot spare raid group with a single disk
- the disk size in this raid group is equal or greater than the bigger disk of the Clarrion
- you have binded a lun in this raid group which appears in Navisphere as a private lun "Hot Spare"
Is it correct ?
BoB73
17 Posts
1
November 21st, 2008 07:00
That did it. I tried to reboot the entire SPs and it did not resolve it...odd. Thanks.
BoB73
17 Posts
0
November 21st, 2008 08:00
AranH1
2.2K Posts
0
November 21st, 2008 09:00
Can you mark Ovivier's answer as correct or helpful if appropriate? It helps to identify the correct answer in a thread.
Thanks,
Aran
ovivier
142 Posts
0
November 25th, 2008 04:00
Thank you Bob for points, but I am not sure to be deserving. Does your last answer means that you have checked your configuration but you still have the problem ?