Unsolved
This post is more than 5 years old
1 Message
0
711
January 12th, 2009 03:00
Emc Clariion AX150
This is with regarding Emc Clariion AX150 Problem.When i try accessing the AX150 through web access, i get error message
" The storage system cannot be managed for the following reason(s):
The software needed to run this application has not fully started. Please wait a few more minutes before opening a browser window "
can some one help on this , iam not able to access clariion box from my network
Regards
Arun Kumar
" The storage system cannot be managed for the following reason(s):
The software needed to run this application has not fully started. Please wait a few more minutes before opening a browser window "
can some one help on this , iam not able to access clariion box from my network
Regards
Arun Kumar
No Events found!
bertog
61 Posts
0
January 19th, 2009 06:00
There are a couple of potential causes for that error message. As the text mentions, the primary reason for it is if the management interface is not fully loaded, such as just after an SP or system reboot. If you receive this message at all times, then the process could be hung and need restarting. You can attempt to do this via the "Navisphere Setup Page." Enter the IP address of one of the storage processors into a supported web browser followed by /setup for example
http://192.168.1.5/setup
Input the user name and password at the prompts.
Click "Restart Management Server"
Wait several minutes and attempt to open Navisphere via a new web browser session. If this does not work you will want to contact your technical support representative, who should be able to advise you on what other steps you can take.