UNSOLVED
J
jmaguileramontero
2 Intern
•
156 Posts
0
4002
September 17th, 2012 13:00
How can I re-initialize a CX4?
Hello evrybody,
I have a CX4-120 storage that before was in production.
Before this storage had a FAST CACHE with SSD flash disk, but now it does not have these disks. I can not destroy the fast cache configuration.
I think that I need to re-initialize this storage to a factory state. or How can I destroy the fast cache configuration?
Please if someone has the procedure to do it.
Thank you.
Jose Miguel Aguilera.
1608
0
Posted September 17th, 2012 23:00
If you want to back revision it, can follow below simple steps:
1. Reboot SPs to DDBS utility menu.
2. Enter Engineer mode, then choose "Invalidate Data Directory". This option will delete the array configuration.
3. Re-image SPs boot partition if need, now the array need to be initiated again.
1608
0
Posted September 18th, 2012 05:00
procedure that is available to authorized partners/EMC employees only.
1608
0
Posted September 19th, 2012 06:00
Hi all,
Thank you for your response. We are partner of EMC and we can use the clariion procedure generator.
I have downloaded the clariion procedure generator where can I find the procedure that Ibseraph said.
Thank you,
Jose Miguel Aguilera
1608
1
Posted September 19th, 2012 07:00
dynamox,
Can I uninstall the FAST CACHE? can you send me the procedure please?.
thank you.
JM
1608
1
Posted September 19th, 2012 07:00
https://community.emc.com/thread/114623
Try this Jose.
DELL-Sheron G
#IWorkForDell1608
0
Posted September 20th, 2012 00:00
hit distroy
DELL-Sheron G
#IWorkForDell1608
1
Posted September 21st, 2012 06:00
Hi all,
Thank you for your help.
I found this KB in powerlink emc266585 about disbling FAST CACHE.
I ran this command:
- naviseccli -h 10.20.30.40 cache -fast -destroy
and then I restarted the management server on both SPs.
this two actions erased all errors.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
1608
0
Posted September 17th, 2012 21:00
not sure if that would do anything but how about uninstalling FASTCache enabler (hopefully you still have the enabler so you can re-install it if you have to) ?