Unsolved
This post is more than 5 years old
12 Posts
0
2794
October 4th, 2011 01:00
Not able to remove private LUN
LUN 1001 - Could not be destroyed. (CX4-240 Flare 29.x)
It is participating in one of the following storage features:
1)Blahahhahahah. This array is being decomissioned, the DAE's have been removed. Snapview was/is installed.
Listed Driver: K10CloneAdmin is returned after running getlun. From reading setfeature is used for Sancopy and Mirrorview, not snapview.I need to remove it to upgrade the Flare, it is currently faulted, and within the unowned Lun group, and private lun group. Before powering off the array all the snapshots were removed.
How do I remove this Lun? I have searched and can not find the answer.
Thanks
No Events found!
rupal1
433 Posts
0
October 4th, 2011 03:00
Hi Dean,
Please try the following:
To remove the clones driver of a LUN that failed to get added to the Clone Group:
naviseccli -h <SP_IP_address> -user <username> -password <password> -scope 0 clone -messner -setclonefeature -off -lun <lunnr>
Thanks
keendean
12 Posts
0
October 4th, 2011 05:00
Hi Rupal,Thanks for the prompt response. Set clone feature failed. Cannot perform setfeature command on a Private LUN. I think it must of been used as part of the reserved Lun pool, any other help you can provide? Thanks, Dean