PowerPath showing dead links

Hello,

I am having an issue with a windows 2003 64 bit server.  It is running Powerpath 5.3 build 311.

This host was attached to a CX3-80 and needed to be migrated over to a CX4-480.  We zoned the host to both arrays and presented the new lun's from the cx4-480.  The consultant we used for the migration used Open Migrator to perform the migration.  THe migration was completed and we removed the old luns from the 3-80 and deleted the old zones.  Nothing shows up on the cx3-80 for this host anymore.

We noticed some dead links after the  migration and i cleared them up with powermt check.   But whenever the host is rebooted, they keep coming back.  Here is an output of powermt display dev=all

C:\Program Files\EMC\PowerPath>powermt display dev=all
Pseudo name=harddisk1
CLARiiON ID=FNM00101100174 [SQL1]
Logical device ID=6006016012602800FEF1254CF143DF11 [SQL1_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A       Array failover mode: 1
==============================================================================
---------------- Host ---------------   - Stor -   -- I/O Path -  -- Stats ---
###  HW Path                I/O Paths    Interf.   Mode    State  Q-IOs Errors
==============================================================================
   2 port2\path0\tgt0\lun0     c2t0d0    SP B0     active  alive      0      1
   2 port2\path0\tgt1\lun0     c2t1d0    SP A0     active  alive      0      0
   2 port2\path0\tgt3\lun0     c2t3d0    SP A0     active  dead       0      0
   3 port3\path0\tgt0\lun0     c3t0d0    SP B0     active  alive      0      1
   3 port3\path0\tgt1\lun0     c3t1d0    SP A0     active  alive      0      0
   3 port3\path0\tgt3\lun0     c3t3d0    SP A0     active  dead       0      0

Pseudo name=harddisk2
CLARiiON ID=FNM00101100174 [SQL1]
Logical device ID=6006016012602800C28A3A5DF143DF11 [SQL1_LOGS]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A       Array failover mode: 1
==============================================================================
---------------- Host ---------------   - Stor -   -- I/O Path -  -- Stats ---
###  HW Path                I/O Paths    Interf.   Mode    State  Q-IOs Errors
==============================================================================
   2 port2\path0\tgt0\lun1     c2t0d1    SP B0     active  alive      0      1
   2 port2\path0\tgt1\lun1     c2t1d1    SP A0     active  alive      0      0
   2 port2\path0\tgt3\lun1     c2t3d1    SP A0     active  dead       0      0
   3 port3\path0\tgt0\lun1     c3t0d1    SP B0     active  alive      0      1
   3 port3\path0\tgt1\lun1     c3t1d1    SP A0     active  alive      0      0
   3 port3\path0\tgt3\lun1     c3t3d1    SP A0     active  dead       0      0

Pseudo name=harddisk3
CLARiiON ID=FNM00101100174 [SQL1]
Logical device ID=600601601260280066B3CB68F143DF11 [SQL1_M]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B       Array failover mode: 1
==============================================================================
---------------- Host ---------------   - Stor -   -- I/O Path -  -- Stats ---
###  HW Path                I/O Paths    Interf.   Mode    State  Q-IOs Errors
==============================================================================
   2 port2\path0\tgt0\lun2     c2t0d2    SP B0     active  alive      0      1
   2 port2\path0\tgt1\lun2     c2t1d2    SP A0     active  alive      0      0
   2 port2\path0\tgt2\lun2     c2t2d2    SP B0     active  dead       0      0
   2 port2\path0\tgt3\lun2     c2t3d2    SP A0     active  dead       0      0
   3 port3\path0\tgt0\lun2     c3t0d2    SP B0     active  alive      0      1
   3 port3\path0\tgt1\lun2     c3t1d2    SP A0     active  alive      0      0
   3 port3\path0\tgt2\lun2     c3t2d2    SP B0     active  dead       0      0
   3 port3\path0\tgt3\lun2     c3t3d2    SP A0     active  dead       0      0

Pseudo name=harddisk4
CLARiiON ID=FNM00101100174 [SQL1]
Logical device ID=6006016012602800F8FA6978F143DF11 [SQL1_TEMPDB]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B       Array failover mode: 1
==============================================================================
---------------- Host ---------------   - Stor -   -- I/O Path -  -- Stats ---
###  HW Path                I/O Paths    Interf.   Mode    State  Q-IOs Errors
==============================================================================
   2 port2\path0\tgt0\lun3     c2t0d3    SP B0     active  alive      0      1
   2 port2\path0\tgt1\lun3     c2t1d3    SP A0     active  alive      0      0
   2 port2\path0\tgt2\lun3     c2t2d3    SP B0     active  dead       0      0
   2 port2\path0\tgt3\lun3     c2t3d3    SP A0     active  dead       0      0
   3 port3\path0\tgt0\lun3     c3t0d3    SP B0     active  alive      0      1
   3 port3\path0\tgt1\lun3     c3t1d3    SP A0     active  alive      0      0
   3 port3\path0\tgt2\lun3     c3t2d3    SP B0     active  dead       0      0
   3 port3\path0\tgt3\lun3     c3t3d3    SP A0     active  dead       0      0

Pseudo name=harddisk??
CLARiiON ID=FNM00101100174 [SQL1]
Logical device ID=6006016012602800742259DAE843DF11
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=Unknown, current=Unknown Array failover mode: 1
==============================================================================
---------------- Host ---------------   - Stor -   -- I/O Path -  -- Stats ---
###  HW Path                I/O Paths    Interf.   Mode    State  Q-IOs Errors
==============================================================================
   2 port2\path0\tgt2\lun1     c2t2d1    SP B0     active  dead       0      0
   3 port3\path0\tgt2\lun1     c3t2d1    SP B0     active  dead       0      0

I cant seem to figure out why they keep coming back after a reboot other then something in the registry...

Has anyone seen this issue or have an idea of how to fix it?

Thanks