Unsolved
This post is more than 5 years old
1 Rookie
•
99 Posts
0
1184
October 27th, 2010 04:00
Unisphere RLP display issue?
Hi,
we are using two CX4-120's in a Mirrorview/A session to replicate a couple of LUN's.
We added a couple of 10GB's lun to the reserved lun pool which have been allocated for the Mirrorview/A sessions.
One thing I noticed is that the allocated LUNs/Session window in main Replicaton screen is empty:
The Free LUNS tab is showing the last available luns and if we check the properties of the RLP we're seeing the allocated lun's.
Is this a bug or is there a reason why it doesn't show the allocated luns/sessions. Maybe only showing it when it really sending over the blocks to the remote side.
Regards,
John
No Events found!
kelleg
4 Operator
•
4.5K Posts
0
October 27th, 2010 14:00
Try restarting Management Server - SPA_IP_Address/setup - do this on both SPA and SPB.
What version of Unisphere are you running? Go to the ? in the upper right corner and select "About EMC Unisphere" I;m using version 1.0.50.1.0248 and I see the Allocationed RLP
glen
Julien_LECORRE
92 Posts
0
October 27th, 2010 23:00
Same unisphere version as kelleg same result in synchronized and synchronizing state of the mirror :
jgrinwis
1 Rookie
•
99 Posts
0
October 28th, 2010 01:00
running V1.0.50.1.0248.
Restarted management server on both SP's but still no info allocated LUNs page.
jgrinwis
1 Rookie
•
99 Posts
0
October 28th, 2010 07:00
They are in the same domain and we connect to the primary array. It's not a big issue and customer didn't complain yet but looks like something is going wrong somewhere.
kelleg
4 Operator
•
4.5K Posts
0
October 28th, 2010 07:00
You have two arrays in the mirror - are both in the same Domain (they should be)? \
When you start Unisphere, make sure you point the address to the IP address of the array that owns the RLP, then see if you can see the RLP.
glen
kelleg
4 Operator
•
4.5K Posts
0
October 28th, 2010 08:00
I would recommend you open a case with EMC - make sure you include the screen capture that you took as well as the spcollects. You might also want to include the contents of the directory c:\documents and setting\ \emc\Unisphere - zip the complete directory - this may help speed up the diagnoses.
glen