Hi,

what is it that you want to use CTA for ?

Rainer

Hi,

I want to use CTA for archiving, from VNX to CENTERA

Ok – then I suggest to follow the documentation

See https://support.emc.com/docu48597_Cloud-Tiering-Appliance-and-Cloud-Tiering-Appliance-VE-10.0-(SP1)-Getting-Started-Guide.pdf?language=en_US

Basically you need to:

- Configure the VNX part – FilerMover / DHSM and CIFS / NFS

- Configure CTA with VNX details and Centera config

Rainer

Dear all,

i followed the guide, however VNX is not communicating with CTA.... able to ping the CTA IP.
When both are added in the DNS server, even the nslookup not resoluting the CTA...

Tried opening a ticket with VNX team, however they replied that they will work only with breakfix and not in configuration..
Can someone help me...

Thanks,
Paul

Ensure both forward and reverse lookup has been configured.

Check your Data Mover DNS resolution.  For example, to check Data Mover DNS, you can use command "server_dns server_2".

You may need to add a default route to the Data Mover.  You can add the default route/gateway with "server_route server_2 -add default ".

-Scott

Hi,

Now i am getting CCD authentication failed,  however the file mover authentication was successful..
i have created the user name rffm and also created the same in celera given administrator role for this login.. still i am getting the authentication failure msg...