This post is more than 5 years old
1 Rookie
•
1 Message
0
83485
July 3rd, 2014 11:00
SNMP v3
Hi guys
Does Compellent support SNMP v3? In our network, only SNMP v3 is allowed.
Cheers, Dani
No Events found!
This post is more than 5 years old
1 Rookie
•
1 Message
0
83485
July 3rd, 2014 11:00
Hi guys
Does Compellent support SNMP v3? In our network, only SNMP v3 is allowed.
Cheers, Dani
Top
BVienneau
115 Posts
1
July 7th, 2014 10:00
I believe Compellent is currently using SNMP v2C. That was added in SCOS 6.3. I did not see anything in the 6.4 new features or 6.5 release notes documents that I have on adding v3.
yado33
9 Posts
0
July 7th, 2014 03:00
i have the same quistion....
soran university
mullerjohn277
1 Message
1
March 1st, 2016 06:00
Hi all,
Good news for all of us. SNMP v3 is included in SCOS 7.x
Have a nice day
JM
JLM77
4 Posts
0
October 18th, 2019 07:00
Hi, I can't get our compellent (CT-SCv3020) to be discovered in Dell OME using SNMPv3. It discovers fine with SNMPv2. It is running FW 7.2.40.36.
If I run the Dell Troubleshooting tool I get the following output.
SNMP Error number=-37 snmpget - Decryption error
JLM77
4 Posts
0
October 18th, 2019 07:00
I have just tried and got a different error
MIB-II (System Name)::EndError in packet: (genError) A general failure occured
Any help would be appreciated as are only allowed SNMPv3 in environment