Take care, Fabos 5.2 now supports AD, and you can not use this zoning button if you are on the Physical Fabric, unless you decide to (and telnet the switch to set it up).
Check at the upper of the screen, there is a drop down list, and select AD 0
Ever since the GUI screens crashed the SAN years ago, I don't use these anymore. I keep them permanently disabled. They should be avoided at all costs. It's better to learn the CLI and manage them that way. If you use the GUI you are asking for problems. Stick with the CLI.
It happened to me yesterday when I began cofiguring two switches with 5.2.0a. The 'Zone Admin' button shows up but you have to scroll down the applet to see it.
But the pop up still shows from time to time. And when making configuration changes, they do not reflect in the current view of the applet (not after a fabric/zoning refresh).
OlivierT1
1 Message
0
May 2nd, 2007 11:00
Take care, Fabos 5.2 now supports AD, and you can not use this zoning button if you are on the Physical Fabric, unless you decide to (and telnet the switch to set it up).
Check at the upper of the screen, there is a drop down list, and select AD 0
Olivier
sysmgr1
2 Intern
•
128 Posts
0
January 31st, 2007 05:00
bondarash
1 Message
0
February 2nd, 2007 03:00
It happened to me yesterday when I began cofiguring two switches with 5.2.0a. The 'Zone Admin' button shows up but you have to scroll down the applet to see it.
But the pop up still shows from time to time. And when making configuration changes, they do not reflect in the current view of the applet (not after a fabric/zoning refresh).
cheers,
bogdan
sysmgr1
2 Intern
•
128 Posts
0
February 2nd, 2007 05:00