This post is more than 5 years old
97 Posts
0
470
June 13th, 2007 07:00
Fabric Manager
We have two MDS9513's running firmware 3.0(2a) - As per EMC's recommendation.
We just installed two MDS9124's running firmware 3.1(2a) - As per HP's recommendation.
The problem I'm having is FM 3.0 runs fine for the 9513's & 9124's, but device manager doesn't work with the 9124's.
FM 3.1 doesn't show the "fabric seed switch" dialog box and wont connect properly to any switch, but DM works...
I'm assuming FM 3.1 has an option to allow connectivity to the MDS9124's?
I'm trying to settle on something that works for all of my switches.
We just installed two MDS9124's running firmware 3.1(2a) - As per HP's recommendation.
The problem I'm having is FM 3.0 runs fine for the 9513's & 9124's, but device manager doesn't work with the 9124's.
FM 3.1 doesn't show the "fabric seed switch" dialog box and wont connect properly to any switch, but DM works...
I'm assuming FM 3.1 has an option to allow connectivity to the MDS9124's?
I'm trying to settle on something that works for all of my switches.
No Events found!
ConnectrixHelpe
259 Posts
0
June 13th, 2007 12:00
I don't know if you have the 9124s ISL'ed to the 9513s or not. If you do, please understand that SAN-OS 3.1(2a) and 3.0(2a) combined (ISL'ed) have not been tested or approved by EMC. With that said, if the issue you are looking for one FM to support both the separate 9124 at 3.1(2a) and 9513 at 3.0(2a), I'd recommend having an RPQ done so we can provide you with Fabric Manager 3.1(2c) that will support both switches and has a variety of key fixes in it.
Thank you.
jimkunysz
2 Intern
•
259 Posts
0
June 18th, 2007 05:00