I have two DD2500 DataDomains: I use Networker 8.2 windows
I configured 4 ports on both of them and bind them to a virtual interface.
When I do a backup it uses all four network cards. When I clone the Primary Datadomain where I backed up to use the management port to read. I did My ip addresses and names are correct.
I have moved the discussion to the Data Domain Support forum for better visibility and indexing. If you think this is not a relevant area, please click on 'Move' under the 'Actions' widget and enter the appropriate space the content should be moved to.
Are you actually using 5x NIC's - sorry it's not clear which port you are calling management?
veth0 maybe is aggregated with 4x NICs (LACP) and then one further single port for management - perhaps your default gateway is on the management port only?
You may need to set a route between your 2x DD's to force replication traffic across that IF and not your backup virtual interface.
"Net show settings" and "net show hardware" may help the discussion - along with your default gateway - "route show gateway".
Please de-sensitize the IP's/hostname you paste here (public forum and all).
Rajneeshkv
2 Intern
•
127 Posts
609
0
Posted November 17th, 2014 06:00
Hi,
I have moved the discussion to the Data Domain Support forum for better visibility and indexing. If you think this is not a relevant area, please click on 'Move' under the 'Actions' widget and enter the appropriate space the content should be moved to.
Raj