This post is more than 5 years old
31 Posts
0
348
August 10th, 2015 15:00
DD630 OS Installation
Hello, I am trying to do a fresh OS installation on a DD630 with 7 x 1TB drives. The unit boots and I select the VGA installation and after I get an error
PROBLEM at (dd_screen.c:dd_execute_ex:959)
Command failed /etc/rc.d/rc.dmsetup)
I have done the same procedure on other units without any issues. Any ideas?
Regards,
Paul
0 events found
No Events found!
paul_aviles
31 Posts
0
August 11th, 2015 13:00
Ok I figured it out. The DD setup procedure does not properly check the partitions on a drive and it expects it to be complete clean. Removing all partitions fixed the issue.
Hope this helps someone!
Paul