5.4.5.0 or something else? Also, which DD box? I had 10 DDs updated from 5.2 to 5.4.x and I never had this so it might be DD specific. Anyway, I guess you need ticket with support to fix it and in course of doing that they can also answer your question.
I ask this as I saw recommendation this morning to apply 5.4.5.0 due to some security fixes and I didn't had this issue with DD160, DD620, DD630 and DD890 that I have so far. I checked article you mentioned and not sure what to think as it seems to be applicable to many. I just checked (there is command system ugrade history) and this was path on one of DD890 I had (but all other had the same including lower models) - without issues so far:
What DDOS version are you currently running? 5.4.4.2? Regardless, this applies to All Software releases, but specifically pertains to the SAS 1 HBA and 0605 firmware version.
Correct... my next jump should be on 5.4.5.0 due to security fixes. I guess I will need to double check fw revisions before updating (but I assume I should error free due to previous jumps being ok unless troubled fw has been introduced in last version that I have).
This is something you will need to discuss with support (if they will disclose it in first place - enduser normally cares about his/her issue being fixed only and less about details as why). I'm happy that our DD160 went fine (I didn't check fw version involved prior to upgrade).
ble1
4 Operator
•
14.3K Posts
0
April 8th, 2015 02:00
5.4.5.0 or something else? Also, which DD box? I had 10 DDs updated from 5.2 to 5.4.x and I never had this so it might be DD specific. Anyway, I guess you need ticket with support to fix it and in course of doing that they can also answer your question.
StevenAraujo
25 Posts
0
April 8th, 2015 09:00
Yes, 5.4.5.0 on a DD880 w/ ES20 shelves
ble1
4 Operator
•
14.3K Posts
0
April 8th, 2015 15:00
I ask this as I saw recommendation this morning to apply 5.4.5.0 due to some security fixes and I didn't had this issue with DD160, DD620, DD630 and DD890 that I have so far. I checked article you mentioned and not sure what to think as it seems to be applicable to many. I just checked (there is command system ugrade history) and this was path on one of DD890 I had (but all other had the same including lower models) - without issues so far:
Version Partition State Time
Number
-------------- --------- ------- ------------------
5.1.1.0-291218 1 INSTALL 11/21/12 10:37:31
5.1.3.0-338649 2 UPGRADE 04/25/13 11:37:19
5.2.2.4-370754 1 UPGRADE 11/14/13 14:35:27
5.2.4.2-404896 2 UPGRADE 03/26/14 12:52:59
5.2.5.0-414946 1 UPGRADE 06/19/14 13:11:16
5.4.4.2-453843 2 UPGRADE 12/11/14 13:02:24
-------------- --------- ------- ------------------
StevenAraujo
25 Posts
0
April 8th, 2015 16:00
What DDOS version are you currently running? 5.4.4.2? Regardless, this applies to All Software releases, but specifically pertains to the SAS 1 HBA and 0605 firmware version.
ble1
4 Operator
•
14.3K Posts
0
April 9th, 2015 01:00
Correct... my next jump should be on 5.4.5.0 due to security fixes. I guess I will need to double check fw revisions before updating (but I assume I should error free due to previous jumps being ok unless troubled fw has been introduced in last version that I have).
StevenAraujo
25 Posts
0
April 9th, 2015 16:00
It appears there's some 'special' procedure to be done, to fix this issue. Anyone know what this issue is?
ble1
4 Operator
•
14.3K Posts
0
April 12th, 2015 16:00
This is something you will need to discuss with support (if they will disclose it in first place - enduser normally cares about his/her issue being fixed only and less about details as why). I'm happy that our DD160 went fine (I didn't check fw version involved prior to upgrade).