ddve 4.0 and NVRAM disk

Question

Hello! I have a KVM hypervisor. I installed ddve 4.0 and connected 250 and 10 GB drives. But I can't see NVRAM. Should I see dev1 and dev2?But this is not! sysadmin@ddve-vc1# disk show hardwareDisk Slot Manufacturer/Model Firmware Serial No. Capacity Type(pci/idx)---- --------- ------------------------ -------- -------------------------------- --------- ----dev1 0:0 QEMU QEMU_HARDDISK n/a e26de30a-8648-42c0-b6dd-19239a2f 250.0 GiB SASdev6 0:2 QEMU QEMU_HARDDISK n/a (unknown) 10.0 GiB SAS---- --------- ------------------------ -------- -------------------------------- --------- ----2 drives present. # disk show stateDev 1 2 3 4 5 6--- ------------------1-6 U - - - - U--- ------------------ Legend State Count------ ------------------- ------ Not Installed Disks 4U Unknown Device 2------ ------------------- -----Total 0 disks and 6 devs   How do I connect NVRAM?

uvarovnick · Accepted Answer

The problem was solved - I reconnected all the disks.

Data Domain

Was this post helpful?