15 Posts
0
2713
March 2nd, 2021 10:00
OpenManage Enterprise update using baseline
Question about updating firmware using OME and the firmware/driver compliance baseline. I tested updating a server which has not been updated in a while. I used the "make compliant" option and selected all the available updates from the repository I setup. After running the update some updates were successful, some failed. Is there a way to schedule the job to run several times? Maybe some of the failures were due to incremental updates?
Running
Starting communication with the device.
Performing the requested operations
Delete Job was successful
iDRAC Job has been cleared
Checking LC Service State
Checking Remote Services availability
Remote Service is ready.
Checking LC-Service state
Checking Remote Services availability
Remote Service is ready.
Initiated Update Job for DCIM:INSTALLED#iDRAC.Embedded.1-1#IDRACinfo with JobId (JID_146720822163)
Empty response returned while checking job status for JID_146720822163
Empty response returned while checking job status for JID_146720822163
Empty response returned while checking job status for JID_146720822163
Empty response returned while checking job status for JID_146720822163
Job status for JID_146720822163 is Completed
Message: Job completed successfully.
Message ID: RED001
System state check initiated.
iDrac state check.
Checking LC-Service state
Checking Remote Services availability
Remote Service is ready.
Initiated Update Job for DCIM:INSTALLED#701__NIC.Integrated.1-1-1 with JobId (JID_146731205990)
Initiated Update Job for DCIM:INSTALLED#802__Diagnostics.Embedded.1:LC.Embedded.1 with JobId (JID_146731228163)
Initiated Update Job for DCIM:INSTALLED#741__BIOS.Setup.1-1 with JobId (JID_146731252311)
Initiated Update Job for DCIM:INSTALLED#304_C_Disk.Bay.2:Enclosure.Internal.0-1:RAID.Integrated.1-1 with JobId (JID_146731264318)
Initiated Update Job for DCIM:INSTALLED#308_C_Enclosure.Internal.0-1:RAID.Integrated.1-1 with JobId (JID_146731280368)
Initiated Update Job for DCIM:INSTALLED#802__DriverPack.Embedded.1:LC.Embedded.1 with JobId (JID_146731334149)
Initiated Update Job for DCIM:INSTALLED#301_C_RAID.Integrated.1-1 with JobId (JID_146731381654)
Job status for JID_146731205990 is Downloaded
Message: Package successfully downloaded.
Message ID: RED002
Job status for JID_146731228163 is Completed
Message: Job completed successfully.
Message ID: RED001
Job status for JID_146731252311 is Downloaded
Message: Package successfully downloaded.
Message ID: RED002
Job status for JID_146731264318 is Downloaded
Message: Package successfully downloaded.
Message ID: RED002
Job status for JID_146731280368 is Downloaded
Message: Package successfully downloaded.
Message ID: RED002
Job status for JID_146731334149 is Completed
Message: Job completed successfully.
Message ID: RED001
Job status for JID_146731381654 is Downloaded
Message: Package successfully downloaded.
Message ID: RED002
Created Reboot Job (RID_146738181255)
Scheduled all downloaded Update Jobs.
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Pending Reboot
Job status for RID_146738181255 is Reboot Failed
Deleting the job
Delete Job was successful
Deleted Job Id:JID_146731205990
Delete Job was successful
Deleted Job Id:JID_146731252311
Delete Job was successful
Deleted Job Id:JID_146731264318
Delete Job was successful
Deleted Job Id:JID_146731280368
Delete Job was successful
Deleted Job Id:JID_146731381654
Task Failed. Completed With Errors.
No Events found!
justin gray
2 Intern
•
143 Posts
0
March 3rd, 2021 09:00
I find I frequently have to go to the individual server and run 'Refresh Inventory', then run the compliance check again. Failing that, I typically have to go to the individual device, reset iDRAC (Troubleshoot > Reset iDrac), then repeat the above; refresh inventory and run compliance check.
There are a number of thread here with the failed reboot issue, so you're not alone there.
HTH.
Dell-DylanJ
4 Operator
•
2.9K Posts
0
March 2nd, 2021 14:00
Hello,
The job scheduler is able to set up recurring jobs. Page 122 provides details on this, but it is the "Run On Schedule" option.
https://dell.to/3kDlVMp
As for the error message, the only job that failed was the reboot itself.
Created Reboot Job (RID_146738181255)
Job status for RID_146738181255 is Reboot Failed
I'd manually reboot the target system.
Mtngoat1979
15 Posts
0
March 3rd, 2021 07:00
Even after another reboot most of the firmware was not updated. I selected all firmware to update.