Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

314876

August 15th, 2012 09:00

Dell optiplex 990 SSF video / graphics upgrade

I have a dell optiplex 990 ssf with an i5 processer, 4GB ram and 240w psu, my aunt got me for school this year.  it is perfect for writing paters and surfing but I'd also like to play some video games.  I'm pretty sure the integrated graphics card isn't much for gaming.   As I searched the forums here I came across a potential limiting factor of this motherboard as to a 25w limit to the pci-e slot.  This motherboard has only 2 16x sized pci-e slots and nothing more.  The documentation is unclear as to which motherboards in the optiplex 990 series has this limitation and which integrated video system is included.  Could you please help me as to which video cards I can utilize in this rig? 

Currently my 2 considerations are:

Radeon HD 6670 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready Low Profile

or

Radeon HD 7750 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready

Both are low wattage and low profile.

I do not intend on overclocking anything just to use this system for moderate gaming on occasion.

Any advice would be appreciated.

9 Legend

 • 

47K Posts

August 31st, 2012 21:00

There is ZERO to no Room for many cards on the SFF.  You would have to hacksaw and dremel and even then it may be too large.

VisionTek Radeon HD 6570 SFF DMS59 - Graphics card - Radeon HD 6570 - 1 GB - PCI Express 2.1 x16 low profile - Mini-DisplayPort, DMS-59
Usually Ships Within 24 Hours
Manufacturer Part# 900463
Dell Part# A5690002
Recommended Power Supply
       
  270 W

There was a Guy that Shoehorned a 5670 into the 990 after using hacksaw, dremel tool, and then electric tape to hold it back together since the cover no longer latched.

2011 Low Profile Gaming Graphics Card - Brian's Ski Epic

Jun 2, 2011 – Below is the original MSI ATX Radeon HD R5670 graphics card immediately before I cut into it with the dremel ....

Since I cut off the side of the caddy, I attach the hard drive to the caddy with electrical tape.  You can see the electrical tape in the red circles in the picture below.  The point "P" in the picture below will rotate down and press up against the new graphics card.

4 Operator

 • 

4.4K Posts

May 31st, 2013 05:00

This thread has been locked due to inactivity. For assistance, with same issue or a different issue, please click New Post on the top right to start a New Thread.                          

No Events found!

Top