Unsolved
This post is more than 5 years old
1 Message
1
40385
Adapter for Dell monitor stand
Hi,
I have a Dell stand (photo below) I want to use with a non-Dell monitor that has 100 x 100 mm Vesa hole mount pattern and Can someone tell me what kind of adapter to buy to make the stand work?
Thanks!
Dan-H
1.2K Posts
0
September 27th, 2017 23:00
maybe this?
accessories.dell.com/.../productdetail.aspx
keep in mind the weight for the new monitor may be a bit less than the original and won't have enough weight to adjust down and stay down.
speedstep
9 Legend
9 Legend
•
47K Posts
1
September 28th, 2017 05:00
You cant use Your Stand with the Dell Plate. The stands that work with the vesa plate go up and down and also rotate portrait and landscape with a swivel in the center held by 4 screws.
452-10833
Vesa Plate Upgrade Required to mount a non-Dell Monitor to the flat panel stand (Kit)
VESA adapter plate For E-Flat Panel Monitor Stand
https://www.ebay.com/i/401352352466
DP/N: Y009C KIT,PLT,MTG,VESA,E-FPM,75/100M
DP/N: G999H. CUS, PLT, MTG, VESA, E-FPM
So the G999H , Y009C is compatible with the following but not limited to:
Dell E-Series Flat Panel Monitor Stand DELL 330-0874, R427C, RM361, T545C, M520M E-FPM Monitor Stand and Laptop Notebook Dock For Dell Latitude E4200, E4300, E5400, E5500, E6400 / 6400ATG, E6500 E-Family Laptops and Precision M2400, M4400, M6400 Mobile
https://www.amazon.com/Dell-Monitor-Optional-Mounting-Latitude/dp/B007TKXYYS/
So you remove the Dell Plate with fingers by removing the 4 screws in the center and put this plate on. Then you put the standard screws for vesa mounting thru the plate via the rear.
That needs a stand with mounting like this.