Unsolved
This post is more than 5 years old
37 Posts
0
9699
July 28th, 2014 17:00
Alerts...or lack there of
Hello,
I am running SAN HQV3 and I was wondeirng if there were any environmental alerst we can turn on? Sort of like in the cirtical, wraning, caution, info tabs. I am looking for something that reads the temp and humidity and could be emailed if a certain threshold is hit. thanks!
No Events found!
Origin3k
6 Operator
•
2.4K Posts
•
12.4K Points
1
July 28th, 2014 23:00
To see which alarms are available click in SANHQ on Settings-> E-Mail Settings-> Notification and check the 4 Tabs at the bottom labeld Group xxx Alerts.
If you got an E-Mail is looks looks like this one:
This message was generated by the Dell EqualLogic SAN HeadQuarters service (version 2.2.0.5924) running on san-hq.example.com The following condition on Group group01 (group01.example.com) has generated an alert notification: Warning conditions: 30.05.2012 19:53:15 to 30.05.2012 19:55:15 Warning: Member equal-store-6 High Temperature Warning: Member equal-store-6 One or more sensors detected a temperature that exceeds the high-temperature warning limit.Regards,
Joerg
Origin3k
6 Operator
•
2.4K Posts
•
12.4K Points
0
July 29th, 2014 11:00
Ah.... the forum software cut the posting so the version information is missing. But if you take a look the date .... i would say it was SANHQ 2.2 or 2.4.
This alarm is also in the latets version of SANHQ which is 3.0.1.
Regards,
Joerg
m323
37 Posts
0
July 29th, 2014 11:00
Joreg, I do not see this specfic warning, what version are you running?
m323
37 Posts
0
July 29th, 2014 12:00
Joerg, maybe I am blind but what tab is is under? Alert ID number?