If that's the only error then for now you can ignore it. As the error was corrected. Keep monitoring the array. If you get more of these then replace the controller. If the firmware is very old and you have a support contract, I would suggest you upgrade the firmware as well.
dwilliam62
4 Operator
•
1.5K Posts
0
December 13th, 2018 01:00
Hello,
If that's the only error then for now you can ignore it. As the error was corrected. Keep monitoring the array. If you get more of these then replace the controller. If the firmware is very old and you have a support contract, I would suggest you upgrade the firmware as well.
Regards,
Don