SANHQ

Question

Hi gurus

I am very new to all this , so go easy on me,

I am trying to setup SAN HQ , I enter the management IP and the SNMP community phrase, but it can not connect, it states that the connection is there but can not load all info, I went to my SAN group and the members of the array are not setup with managment IP.

1) can the group SAN IP be the same as the managment dedicated IP, for reason I believe so , as I can connect to this IP to manage the EQL

2) Does the Managed IP has to be on a different subnet that the members are?

3) Best practice to setup this env, so SANHQ can look at the members and all that good stuff

Thanks a bunch gurus

guaro5555 · Answer

Don. Thanks again

My SANHQ server is on 10.110.x.x subnet but I have those two subnet talking to each other , I can see 10.125 from my 10.110 server. so I guess I am doing something else wrong

I will not config the dedicated mgmt as per your advice but I would like to have SAN HQ up and happy.

Thanks again for battling with me on this

guaro5555 · Answer

Don.

Thanks a bunchhh

I Have the follwing setup

SAN Group IP 10.125.x.x and that is also my SAN Managment IP

my members are on the same 10.125.x.x

how do I go config. this ports, when I tried, i told me the management IP has to be on a different subnet

Thanks a bunch for jumping in

guaro5555 · Answer

Its a VM, I will check into what you have said. Thanks again D

guaro5555 · Answer

Don.

I put the machine on the same subnet and the same issue, then , and I am sure you will laugh, I realize this thing need the SNMP to work, and I did not have in place, once I did, they sucker fired up

Thanks again for your time and patience with me.

Thanks

EqualLogic

SANHQ

Was this post helpful?