Browse Community
Help
Log In
Responses(3)
Solutions(1)
Christian Hanse
1 Rookie
•
62 Posts
1
July 24th, 2012 13:00
No that is not possible.
It also cannot be a member of multiple storage pools
justsanjeev
72 Posts
0
July 24th, 2012 14:00
how can we get the information about the system like an ipconfig in windows ??
Joe S586
7 Technologist
729 Posts
Telnet/SSH to the member in question, (or the group IP if only one member), then type the following:
member select member_name eth select port show
(Port - number of the network interface to modify or configure (0, 1, or 2). For example, specify 2 for eth2)
You can also use the EqualLogic PowerShell Cmdlets (download from the support site, where the HIT kit is located).
You may also what to download the CLI guide (on the support site where the Firmware is located)
-joe
Dell Support Resources
View All
Top
Christian Hanse
1 Rookie
•
62 Posts
1
July 24th, 2012 13:00
No that is not possible.
It also cannot be a member of multiple storage pools
justsanjeev
1 Rookie
•
72 Posts
0
July 24th, 2012 14:00
how can we get the information about the system like an ipconfig in windows ??
Joe S586
7 Technologist
•
729 Posts
0
July 24th, 2012 14:00
Telnet/SSH to the member in question, (or the group IP if only one member), then type the following:
member select member_name eth select port show
(Port - number of the network interface to modify or configure (0, 1, or 2). For example, specify 2 for eth2)
You can also use the EqualLogic PowerShell Cmdlets (download from the support site, where the HIT kit is located).
You may also what to download the CLI guide (on the support site where the Firmware is located)
-joe