Hello K fortune,

Here is a link to the best practice guide which includes the setup for you DR4100. Also as seanbrewer posted links to the white papers so depending on which DR4100 you have you can find the correct setup guide for your software.

Please let us know if you have any other questions.

Hello K_fortune,

Here is a link to our Best pratice guide for setting up your DR4100. If you look on page 16 it shows the different ways to setup your DR4100. ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-dr4100_White%20Papers_en-us.pdf

Please let us know if you have any other questions.

Good morning- do you already have copies of the administrators guide?

If not, here you go:

ftp://ftp.dell.com/Manuals/Common/dell-dr4000_Administrator%20Guide_en-us.pdf

and here's the link for the other manuals, whitepapers, and best practices guides:

http://www.dell.com/support/home/us/en/19/product-support/product/powervault-dr4100/manuals

Hope that helps.

Thx

Hi DELL SAM L,

I have a DR4100 with 4 NIC ports, 2x 1Gb and 2x10Gb i would like to know how to connect those ports to my system?

1. Should i connect only the 2x1Gb port to my 1Gb swith?

2. Should i connect all the 4 ports even if my switch has only 1Gb port?

In which way am i supposed to link my DR4100 with my existing system.

Thank you in advance!

Hi,

i am facing an issue with a dell DR4100. Everything seems to be correct but when i try to join Active Directory with the FQDN (xxxx.aaaaaaa.org) i got the error message INVALID DOMAIN NAME. either in GUI or CLI

Need help!