UNSOLVED
Hyper-V R2 failover cluster problem with DELL and EMC2 LUNs
hi, I have a problem with DELL server with two HBAs that connect to EMC2 storage.
I've installed Hyper-V Server 2008 R2 and enabled failover clustering.
Installed Mpio software from EMC2. I've registered the server with Server Utility and from Disk Management I can now see the 4 volumes (LUNs).
First run validating tests and had some warnings regarding disks.
I've installed the failover cluster correctly.
Now when I try to add disks or storage it says that there are no such devices.
Can enybody help?
I've installed Hyper-V Server 2008 R2 and enabled failover clustering.
Installed Mpio software from EMC2. I've registered the server with Server Utility and from Disk Management I can now see the 4 volumes (LUNs).
First run validating tests and had some warnings regarding disks.
I've installed the failover cluster correctly.
Now when I try to add disks or storage it says that there are no such devices.
Can enybody help?
- HI, resolved..now the hyper-V cluster is up and running and can switch over the resources.
The only funny part and a bit tedious if I can say, is the creation of VM once you have enabled CSV disks.
The path should bee C:\ClusterStorage\Volume1 and the location?
When I try to create a VM the wizard only sees local disks, not the CSV disks. In the first option I've inserted the path C:\ClusterStorage\Volume1 , but I can't understand where to define the real location of VM.
Non very stright forward approach... - ok, answered myself:
http://searchstorage.techtarget.com.au/articles/33698-How-to-Implement-Hyper-V-R2-s-new-Cluster-Shared-Volumes-feature
Be aware that when you create the BASIC disks for cluster to define the proper lable, otherwise you will have to FORMAT the volume to set the new label.
RyanW-Dell
1 Message
235
0
Posted September 21st, 2009 14:00