SMcli for Linux - MD3600f

Question

Hi all, I'm hoping someone is able to help, I'm after a SMcli for linux in order to be able to monitor one of our new PowerVault MD3600f boxes. I've managed to find a version on the net but it doesn't work, the error message is below, I've checked Dell drivers and it doesn't list anything for my product, any ideas? The storage management software (version 10.75.G6.12) you are attempting to use is not compatible with the firmware on the RAID controller modules in Storage Array MD3600f.If you have recently updated your RAID controller module firmware, you need to make sure that its compatible storage management software has also been installed on all clients connected to this Storage Array.If the appropriate version is not available, please provide your Customer Support Representative with the following information.RAID Controller Module firmware version: 07.84.44.60RAID Controller Module appware version: 07.84.44.60Device API version required: devmgr.v1084api04.ManagerSMcli failed.

DELL-Sam L · Accepted Answer

Hello trevrobwhite,

What you need to do is to download the latest resource cd as it is compatible with Linux. Here is the link to download that you need for your version of firmware on your MD3600f. http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/powervault-md3600f?driverId=3RVWY&osCode=WLHS1&fileId=3209564113&languageCode=EN&categoryId=CD

Please let us know if you have any other questions.

trevrobwhite · Answer

Worked a treat thanks.

FluidFS

Was this post helpful?