Help with Isilon SNMP traps

Question

I'm copying a message from ECN Member, Vee from a document into a discussion for additional visibility.

Hi

I loaded the isilon-mib file into spectrum which worked, then I tried to load the isilon-trap-mib file and it failed.

Could not resolve 'physIfaces' within the trap 'netAggStatusCrit'. Check for a misspelling or a missing IMPORT statement.

Could not resolve 'ifName' within the trap 'netAggStatusCrit'. Check for a misspelling or a missing IMPORT statement.

Could not resolve 'physIfaces' within the trap 'netAggStatusWarn'. Check for a misspelling or a missing IMPORT statement.

Could not resolve 'ifName' within the trap 'netAggStatusWarn'. Check for a misspelling or a missing IMPORT statement.

I then tried to import the isilon-trap-mib file into CA-nsm for trap formatting and it asked for the supplier and then goes onto ask for the oid of all the traps.

Please can someone list all the full oids of the traps starting with nodeStatus.

Or provide me with a "fixed" isilon-trap-mib file.

Thanks Vee

cadiletta · Answer

As OneFS versions have changed, the Isilon-MIB has changed as well to accomodate updated commands and information output. So it is possible there is a mismatch between the isilon-trap-mib file and the MIB's available in your version of OneFS. Could you update us with the following information so we can help further?

What version of OneFS are you running?

Ideally, could you attach the isilon-trap-mib that you are using now or link to it, so we can be sure it's the right version and we can check it against the same OneFS version as you are running?

Vee1 · Answer

Hi I received another isilon-trap-mib file but that also does not work. I have attached the mib file. I am trying to get an answer for the OneFS version. Thanks Vee

cadiletta · Answer

Vee,

In the trap listing, you are trying to gather the status on the physical network interfaces to monitor if they are up or down. Now it appears that the variables "physIfaces" and "ifName" are not recognized by importing these MIB's.

A quick fix here might just be to remove the netAggStatus objects from your TRAP file and see if it'll load. Then if you do need to monitor aggregated network interfaces, you could further review what traps are available to monitor.

I just loaded up the attached file above in wordpad as it formats the file to something readable. You can search for 'netAggStatus' and remove the 19 lines of that section and see if the rest loads.

Vee1 · Answer

Hi

I removed the netagg from the trap mib but the netstatus is still a problem. I could remove those as well.

What is more important to me is importing the trap formats from the trap mib into CA-NSM so that when a trap comes in it formats correctly. On the import it does not recognise who owns the mib (minor) next step it asks me for the OIDs of all the traps defined in the trap mib, it should not do that, it should just load the traps.

There are lots of traps listed, and I am not sure of the oids

I have attached screen shot of my import but the validity of the oids is unknown.

Thanks Vee

Isilon

Help with Isilon SNMP traps

Was this post helpful?