This post is more than 5 years old
2 Intern
•
356 Posts
0
2590
May 3rd, 2017 11:00
Isilon - Network Connections
Community,
Something weird happened today. After adding nodes to the cluster none of the network connections worked. We had the interfaces added to a SmartConnect Pool and everything yet the 1GB and 10GB interfaces where not getting pings. The funny part is that the 1GB connection to the node worked before we added it to the cluster. No we didn't test the connection to the 10GB beforehand but we did with the 1GB interface. Have anyone experienced a similar issue?
No Events found!
chjatwork
2 Intern
•
356 Posts
1
May 9th, 2017 11:00
Problem solved. We had VLAN tagging on the SmartConnect and the ports on the switch wasn't configured for the VLAN we had tagged. Thank you for your help.
chjatwork
2 Intern
•
356 Posts
0
May 3rd, 2017 11:00
Yes, we still have free IP-Addresses in the IP-Range
sluetze
2 Intern
•
300 Posts
0
May 3rd, 2017 11:00
Do you still have free IP-Addresses in your IP-range?
kipcranford
125 Posts
0
May 3rd, 2017 12:00
You can run "ifconfig" on the nodes. Do you actually have IPs defined on those interfaces?
chjatwork
2 Intern
•
356 Posts
0
May 3rd, 2017 12:00
Yes, the IP shows up in "isi status" and ifconfig
Sent from my iPhone
Phil.Lam
3 Apprentice
•
625 Posts
1
May 3rd, 2017 14:00
can you give an "ifconfig -a"output of a non-working node.