Unsolved
1 Message
0
3520
March 25th, 2021 06:00
Task Sequence Erro
Good day. We just purchased dell Latitude 5410 10th Gen. But when we try to image these machines via SCCM we get Task sequence error code 0x80070490 in the task sequence step 'Partition Disk 0 - UEFI'. But when we image the previous model which is the 5400 it works perfectly. One more other issue is that SCCM does not run when you plug your network cable to the build in network port. Your assistance will be highly appreciated as we are stuck.
DELL-Cares
Moderator
•
27.6K Posts
0
March 25th, 2021 06:00
Thank you! We have received the required details. We will work towards a resolution. In the meantime, you may also receive assistance or suggestions from the community members.
DET_Tech
1 Message
0
June 15th, 2021 06:00
Setting the drive boot format to UEFI has worked for all previous Dell models, when imaging with Microsoft Endpoint Manager (SCCM)? What are the BIOS settings for the Task Sequence step "Partition Disk 0 - UEFI" to not result in the 0x80070490 error? This is for a Latitude 9520.
Pash Jugpal
1 Message
0
September 30th, 2021 03:00
Was there ever a resolution to this issue?
AlexanderJ
5 Posts
0
October 12th, 2021 00:00
I think if you change the disks to "AHCI/NVMe" instead of "RAID On" it will start working again.