Unsolved
This post is more than 5 years old
18 Posts
1
216293
October 24th, 2015 21:00
Intel Management Engine Interface (Code 10) - Need help
Hello,
I've already asked the community about this issue last month, but unfortunately, it hasn't been fixed since then.
This is the error I'm receiving after installing the driver "Intel(R) Management Engine Interface":
This device cannot start. (Code 10)
STATUS_DEVICE_POWER_FAILURE
Here's the driver's version: 9.5.14.1724
Here's my BIOS version: A11
Here's the LMS service's version: 9.5.10.1628
I've tried many different versions of the driver, but it doesn't seem to fix it. Here's something I've noticed though: During the installation of the driver, the title "Intel(R) Management Engine Interface" appears and it says that it's working. But after it says "Installing LMS.exe" or whatever, the driver gets a yellow exclamation point and stops working.
I think the LMS thingy might be the issue.
Thanks,
Qubn
judal7837
2 Intern
•
327 Posts
0
October 26th, 2015 01:00
try this code on the CMD " sfc /scannow " to fix damaged files on windows, if exist.
tell me how it goes
Qubn
18 Posts
0
October 28th, 2015 14:00
It wasn't able to find any errors.
Qubn
18 Posts
0
October 28th, 2015 15:00
I'm using the Alienware Aurora R4. My motherboard is: Alienware 0FPV4P
I also have the driver installed, but it gives me an exclamation point and says :
This device cannot start. (Code 10)
STATUS_DEVICE_POWER_FAILURE
I heard that it's probably not working because of the LMS service which could be outdated on your machine.
judal7837
2 Intern
•
327 Posts
0
October 28th, 2015 15:00
ok, now give me your model ? i dont know wich model are you using.
and check in device manager if you have the intel management driver on system devices sub menu