UNSOLVED

Rickieboy1

updated

22 years ago

0

4841

October 5th, 2004 22:00

Nvidia Geforce Fx 5700LE

Has anyone with a Dimension 4300 either got or upgraded to an Nvidia Geforce Fx 5700LE 128Mb 8xAGP, if so is it any good?? At the moment i have onboard a nvidia geforce2 MX 32Mb.

Dell Dimension 4300

256Mb SDRAM

32Mb Nvidia Geforce2 Mx

  • B4runo

    1100 Posts

    156

    0

    Posted October 6th, 2004 13:00

    Rickieboy1:

    I recently purchased an XFX GeForce FX5700LE 128MB 8XAGP card.  I am planning to install it in the very near future.  It sounds like your current video card is of a similar vintage as mine.  I came to the conclusion that (almost) any card would result in an improvement in performace over the current state of affairs.  I would suggest that you peruse the video forum and get as much info and ideas that you can.  I got a good deal on the XFX card at 'tigerdirect.com'. 

     

    Good luck,

    B4runo

    DIMM 4400
    BIOS – A06, date 6/12/02
    Win XP Home Edition, SP2
    Pentium4 2.0AGHz
    1 GB DIMM RAM
    80 GB 7200 RPM Ultra ATA Hard Drive
    Iomega 80GB External HDD
    NVIDIA GeForce2 MX 4X AGP 64Mb video card
    (soon installing XFX GeForce FX 5700LE 128MB DDR 8X AGP w/ TV & DVI)
    17�, 1702FP Digital Flat Panel Display
    Belkin F5U508 USB 2.0/Firewire PCI card 

  • B4runo

    1100 Posts

    156

    0

    Posted October 6th, 2004 19:00

    Just finished installing the new video card.  It was relatively uneventful as far as delving into computer software and hardware guts go.  Follow ALL of the great instructions and advice posted on the VIDEO FAQs article at the top of the forum page, kudos to Chris M. the DELL mod.  Print and review all of the instructions carefully before diving in.

    Maybe I missed it in the instructions, but, after you completely uninstall and clean out the old graphics card drivers (per instructions), remove the old card in an appropriate manner.  Then restart your system and install the new drivers (per instructions).    

    The difference in the display appearance is somewhat breathtaking.    I was able to go from analog to digital output, what a treat!

    Thanks to all for the info and advice.

    B4runo

    DIMM 4400
    BIOS – A06, date 6/12/02
    Win XP Home Edition, SP2
    Pentium4 2.0AGHz
    1 GB DIMM RAM
    80 GB 7200 RPM Ultra ATA Hard Drive
    Iomega 80GB External HDD
    XFX GeForce FX 5700LE 128MB DDR 8X AGP w/ TV & DVI
    17�, 1702FP Digital Flat Panel Display
    Belkin F5U508 USB 2.0/Firewire PCI card 

    Message Edited by B4runo on 10-06-2004 01:15 PM