Unsolved
This post is more than 5 years old
53 Posts
0
11392
Dell 24" HC Monitor
Hi Iv just ordered a replacement of my Dell 24" monitor which had the tilting problem when locked into the horizontal position. I have a feeling that the replacement will have the same problem. Has anyone here had the same problem which has had a replacement thats resolved the problem? Thanks.
DELL-Chris M
Community Manager
Community Manager
•
54.4K Posts
0
September 5th, 2007 17:00
You should be able to straighten the tilting out?? I did on mine.
Message Edited by DELL-ChrisM on 09-05-2007 01:23 PM
NiKRuLeZ
53 Posts
0
September 5th, 2007 18:00
DELL-Chris M
Community Manager
Community Manager
•
54.4K Posts
0
September 5th, 2007 18:00
szz743
3 Posts
0
September 7th, 2007 04:00
NiKRuLeZ
53 Posts
0
September 7th, 2007 18:00
DELL-Chris M
Community Manager
Community Manager
•
54.4K Posts
0
September 9th, 2007 13:00
I took a carpenter bupple level and checked my desk (slightly unlevel), and then the monitor (slightly unlevel). I then pushed up on the bottom right corner of the monitor to level it out using a carpenter bupple leveler. Any time I knock against the table the monitor goes unlevel. For this issue I would not consider replacing the monitor. As a last result, you may loosen the 4 screws holding the stand to the bracket, level the monitor, retighten the screws. In my opinion, way too much trouble for such a minor issue.
NiKRuLeZ
53 Posts
0
September 9th, 2007 16:00
DELL-Chris M
Community Manager
Community Manager
•
54.4K Posts
0
September 9th, 2007 22:00
You reckon loosening the screws/retighten will definately work?
* Nope. Just something to try.
NiKRuLeZ
53 Posts
0
September 10th, 2007 07:00
DELL-Chris M
Community Manager
Community Manager
•
54.4K Posts
0
September 10th, 2007 12:00