Unsolved
4 Posts
0
413
January 23rd, 2022 12:00
E190S, DisplayPort, PSM
My tower does not have two video out ports for two monitors, so I bought a DisplayPort to be able to use both monitors. The E190S goes immediately into PSM (power save mode) when connected to the DisplayPort. How can fix this without buying another monitor? I don't know alot about computers so any help would be greatly appreciated.
No Events found!
DELL-Chris M
Community Manager
•
56.9K Posts
•
232.1K Points
0
January 24th, 2022 05:00
Very confusing.
The E190S monitor only has one video VGA in port. So how are you using DisplayPort?
Explain this in detail, "so I bought a DisplayPort". Are you saying that you bought a video card and installed it in the tower? If yes, what specific video card? What are its video out ports?
DELL-Chris M
Community Manager
•
56.9K Posts
•
232.1K Points
0
January 24th, 2022 06:00
You have lost me.
What PC model?
None of our monitors ship with splitters? Link to the thing you bought. This is a VGA in port which is on the E190S =
This is the VGA to VGA cable that shipped with the E190S =
This is a DisplayPort =
SDraper
4 Posts
0
January 24th, 2022 06:00
I have 2 monitors. I bought a display port adapter to be able to use both monitors.
SDraper
4 Posts
0
January 24th, 2022 06:00
The 2 monitors came with a splitter but I bought the display port adapter so that I could use the move different applications to different screens and be able to work faster instead. The adapter is plugged into a USB port on the tower.
SDraper
4 Posts
0
January 24th, 2022 07:00
I bought the Dell Optiplex Desktop Computer with dual monitors from a different seller. It had a splitter attached. While attaching the VGA cable to one of the monitors, the ends bent so I bought another VGA to VGA cable and every time I plug it into the display port adapter the monitor instantly goes into power save mode.