Unsolved
This post is more than 5 years old
2 Posts
0
8731
S2240L & HDMI
Hello,
I've got a S2240L, and it works pretty well when I use VGA at 1920x1080@60Hz across all my machines. However, when I use HDMI to connect it to either of my two machines, at 1920x1080@60Hz, it displays a lot of red & blue pixel streaks. At 1024x768@75Hz, however, it works completely fine. In a lot of in-between resolutions, it doesn't work. Note that when the display doesn't work properly, the audio also stutters. Is this a problem with the HDMI cable, or something?
Regards,
Shikhin
Vejay_Sarathy
319 Posts
0
March 1st, 2013 13:00
As per the WHAT'S IN THE BOX section in the dell site
Dell Display Manager Software CD
Drivers and documentation media
I would recommend your to install the Dell Display Manager Software and Drivers for the Monitor from the CD provided in the box. And update graphics card drivers on your 2 machines from the vendors site. If its onboard graphics suggest you to goto support.dell.com and get the latest graphics card driver. If its an add on video card like ATI or NVIDIA suggest you to visit ATI.com / NVIDIA.com to get the latest drivers and install and restart comp. Then check for functionality.
Shikhin
2 Posts
0
March 2nd, 2013 18:00
Hi!
I use Arch (Linux), so I'm up-to-date. Moreover, I also use Windows 8 x86_64, and from that, with updated drivers, I get *no* output on the monitor, at all.
Regards,
Shikhin
DELL-Chris M
Community Manager
Community Manager
•
54.4K Posts
0
March 6th, 2013 07:00
Shikhin,
What specific HDMI cable are you using? You want to be sure that the HDMI to HDMI cable is High Speed.
High Speed HDMI Cable with Ethernet http://bit.ly/16dONPk
High Speed HDMI Gold Cable http://bit.ly/ZwInWk