1 Rookie
•
5 Posts
0
2202
January 11th, 2023 13:00
U2723QE, MacBook Pro, contrast problem
I got my U2723QE today. I connected it to my MacBook Pro 14 via USB-C. Everything is normal so far until I increase the contrast of my U2723QE. The white colors on my U2723QE start to take on a mixture of green and blue. After turning off HDR, it decreased a little more, but a green color prevails on my U2723QE!
No Events found!
eraxius
1 Rookie
•
5 Posts
1
January 14th, 2023 08:00
Dell U2723QE Display Menu (Preset Mode > Color Temp. > 6500 K)
MacBook Pro (System Preferences > Displays > Color Profiles > Dell_U2723QE_DCIP3_v2)
DELL-Chris M
Community Manager
•
56.9K Posts
0
January 12th, 2023 05:00
Why make that change? The online U2723QE User's Guide page 58 shows all that the Menu- OSD factory default for Contrast is 75%. Set it back to 75%. Then make any Contrast changes to the U2723QE from the macOS display control panel.
eraxius
1 Rookie
•
5 Posts
0
January 12th, 2023 05:00
No, there has still been no improvement. When I select SRGB, the color turns gray, but when DCI-P3 is selected, the color green prevails. Contrast and brightness 75%
eraxius
1 Rookie
•
5 Posts
0
January 12th, 2023 10:00
I open a black and white photo from the MacBook Pro. My Dell monitor is seen as green and blue, I think there is a problem with my monitor, what should I do, can you please help? It's only been 24 hours. And my work was very disrupted, I tried all day to fix it, but I couldn't.
eraxius
1 Rookie
•
5 Posts
0
January 14th, 2023 04:00
When I used it as a DCI-P3 over the screen, a green color prevailed. I read an article from another forum explaining that I need to get the screen to 6500K and choose the color profile DCI-P3 from the screen settings on the Mac. And I applied it. At the moment my monitor has great color accuracy. MacBook Pro is incredibly close with a nur XDR display. My problem is solved and I'm in a good mood
yumichan
3 Apprentice
•
736 Posts
0
January 14th, 2023 04:00
Contrast setting should not be modified on an LCD. It's not a "real" control. Contrast is static contrast of panel... and cannot go over default value.
Read your manual to "factory reset" OSD values. Then lower brightness till you find it comfortable.
DELL-Chris M
Community Manager
•
56.9K Posts
0
January 14th, 2023 08:00
Please clarify. Are these your current U2723QE Menu settings?
* Open the U2723QE Menu
* Go to Color
* Go to Preset Modes
* Go to Color Temp
- Change to 6500K
* Go to Color Space
- Choose DCI-P3
* Go to Input Color Format
- Choose RGB
Then you changed to DCI-P3 in the macOS screen settings?
laotuyet
1 Rookie
•
1 Message
0
April 14th, 2025 15:06
@eraxius thank you, you saved me T______T