UNSOLVED
L
lostaunaut
3 Posts
0
3113
September 29th, 2015 16:00
Cannot connect
I have a host (AIX 5.3) that was moved to new hardware (via mksysb). Once the host was moved the networker backups stopped working. To try and get it to start working I have tried deleting the client from Networker, including old backups and nsr peer information. Deleted Networker client from the AIX host, including deleting all the data from /nsr and re-installing a fresh new client. No matter what I try, every time I attempt to add the host I receive this message on the server:
Connecting to host SERVERNAME failed. Unable to connect to server: Application ID 62 is not recognized
and see this message on the client in the daemon.raw:
39078 1443562720 0 0 5 1 975008 0 CLIENTNAME nsrexecd 14 %s error: %s%s 3 0 3 RAP 49 256 78374 151 An unsuccessful attempt to impersonate user %s was made by %s. If %s can be trusted, grant the user "Administrator" privileges on the NetWorker server 3 13 28 administrator@ 13 22 SYSTEM@SERVERNAME 13 22 SYSTEM@SERVERNAME 0 0
My setup is as follows:
Server: Windows 2008R2
Networker Server: 8.2.1.6.Build.806
Client: AIX 5.3
Client Ver: 7.6.5.7.Build.1231
What else can I try to get this client added back in to the Networker server?
1647
0
Posted October 9th, 2015 14:00
I have done both Wizard and manual, both methods return the same error message.
1647
0
Posted October 9th, 2015 22:00
Is your NMC server on a different machine or on the backup server itself ?
On you backups server run the following command (for testing we can change this later) - nsraddadmin *@*
once done try adding the system again.
1647
0
Posted July 27th, 2016 03:00
Maybe too old, but that may help someone
Upgrade your Networker client's agent to a version supported by the server.
1647
0
Posted October 14th, 2016 02:00
I've had similar problem. Client v8.0.2.2, Console 8.2.2.0. When try to configure client using wizard I get the message "Unable to connect to server: Application ID 62 is not recognized". I Upgrade client to v8.2.2.0 and it solved my problem.
1647
0
Posted October 14th, 2016 05:00
IBM AIX 5.2 is not supported in Networker 8.2.1.6.Build.806.
Kindly check product compatibility guide.
1647
0
Posted October 23rd, 2016 23:00
Did you try the following:
On the NetWorker server enter:
nsraddadmin -u "user=root, host=console_host"
On the NMC enter:
nsraddadmin -u "user=administrator, host= console_host"
where console_host is the Console server hostname.
(from the NetWorker Installation Guide)
ble1
6 Operator
•
14354 Posts
•
56186 Points
1647
0
Posted October 8th, 2015 07:00
Sounds like you are using wizard. Use manual method instead (I suspect older NW code on older AIX code doesn't play nice with wizard).