Getting error like nsrlcpd is not running

Question

Hi,
The Library is working fine , but i would try to do mounting the tape and take inventory or labeling the tape immediately getting an error like nsrlcpd is not running , I checked the nsrlcpd service , it is running and in inquire i can see the library and i dit find any problem in configuring the library through the jbconfig , I removed the zoning in library and again added that , still there is a problem . What might be a problem .

Rajesh S

kbuis · Accepted Answer

Hi Rajesh,How are you attempting to do the mount, inventory or label operation? Please check your storage node for the NetWorker server Is it listed long name or short name? Is this listed the same way as the NetWorker Server is listed for the server configuration? They should match.

Jiju1 · Answer

Thanks for the Soultion , I made a host entry changes like before the hostname is in caps and i checked the Storage node name it is small letters over there . SO imade a changes int he host entry just changed to small letters and now it is working fien , Any how thanks a lot for the immed. response .

Rajesh S

ble1 · Answer

When you run nsrjb program, does it report your library is ready?

ble1 · Answer

AFAIK those entries are not case sensitive...

Jiju1 · Answer

Again the same problem is coming after two weeks .

Jiju1 · Answer

yes exactly nsrmmgd and nsrlcpd is running , How can i stop that , If we made any hosts entry it works on previous time but this time is not working , What might be the issue . Kindly help , I need to retirve 1 TB of data , its important . Now the same error is coming like nsrlcpd is not running , But service status it is showing like nsrlcpd is running . Kindly help me .

Rajesh S

amediratta · Answer

Which Networker version is this? Try using NW 7.3.4 OR 7.4.4 as they are more stable in library functionalities than any other version of their own series.

Jiju1 · Answer

HI,
Good Morning , We got support form EMC form CANADA , But still he cant able to resolve the issue , He said he will escalate to L3 Support , We used 7.4.2 and upgraded to 7.4.4 , But still the same problem .

Rajesh S

NWadmin1 · Answer

Disable nsrmmgd at networker startup. To do this, set the environment variable MANUAL_NSRMMGD to ¿yes¿.
Wait until nsrmmdbd and nsrindexd starts up, then invoke:

nsrmmgd ¿D 7 |& tee nsrmmgd.log

This will generate a debug logs...

NavinRam · Answer

Hi all,

I had this issue in March and there are new binaries available. Please log an SR on Powerlink and the Technical Dept. should give you the new binaries.
Remember to rename the old binaries to "_old" so that you can fallback if there is a need.

After changing the binaries on my Backup server, I had no issues with NSRLCPD not running.

Thanks.

Jiju1 · Answer

Thanks .

NetWorker

Getting error like nsrlcpd is not running

Was this post helpful?