HOST ID of Machine

Question

There are two ways to find your Machine ID: MS-DOS Command Prompt and the License Server Administration Menu .
In MS-DOS i have this HOST ID:F036-61B9
In License Server Admin i have this HOST:879E7481
I have error with both authcode of license.

ramsay2 · Answer

I rehosted the LAC for the both HOST ID but I have this error in registratio of server:Invalid authcode of 'GLM License'

HabibG2 · Answer

Licenses and enabler codes are issued on HOST NAME not HOST ID. If you have renamed your host then you must contact EMC Licensing so they can issue a new set of licenses/ enabler codes.

Conact licensing@emc.com

ble1 · Answer

1. MS-DOS thing is not hostid - it looks more like Volume Serial Number. Hostid on Windows is generated according to SID (Security ID). Since you have license manager you can find your hostid with lgtolic -i command.
2. If your license server is configured correctly that is your hostid

It seems as auth code is not given for that hostid. If you received enablers and auth codes you should also see against which hostid they have been given. Is it the one you have listed above?

ramsay2 · Answer

yes I re-host LAC with correct HOST ID in EMC powerlink and I received same enabled code and new authcode .I put the new authcode but same error.

ble1 · Answer

I would suggest to talk to support to verify that your steps were correct and then if all is right licensing should double check it.

NetWorker

HOST ID of Machine

Was this post helpful?